Make a setting as to whether to display/hide the copy screen (copy tab) on the control panel. This is the specification for users who want to customize hiding it on

control panel.

Default value

1: display

Setting range, item

0: hide 1: display

Setting Procedure

1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then

by pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).

2) Press [COPIER] button.

3) Press [Option] button.

4) Press [BODY] button.

5) Press [<-]or[->] (arrow) button.

6) Press [UI-COPY] button.

7) Press either 0 (hide) or 1 (display) on control panel (the numerical value input in the field is displayed), and press [OK] button.

8) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.

-Error at starting up the MEAP application/Setting to hide JAM screen (level 2)

In the case that operation is restricted by MEAP application, hide the warning screen of error/JAM (such as JAM screen, door opening, no-toner). In the case that

these errors occur, there will be a display indicating 'call the service personnel' etc.

Memo:

Part of the warning screens is displayed if shifting to the device screen.

- As for the screens for jam and no-toner, the warning screen (animation) can be displayed by pressing the followings: [Device Screen] > [Recovery Procedure]

- As for the screen for door opening, the warning screen cannot be displayed because there is no display for [[Device Screen] > [Recovery Procedure]

Default value

1: No activation of warning display

LicenseFile-Version: 1

LicenseFile-Id: f6489a8c-8c7e-4d74-bd12-b031ea6a62a5

Application-Id: e92b0b91-7c42-45b1-96b3-295d5d1b5877

Serial-No: XYZ00123

Validated-Period: 100

MaximumBWScan1: 1000, stop

MaximumBWScan2: 900, stop

MaximumBWScan3: 800, stop

MaximumBWScan4: 700, stop