3-Relay And 6-Relay Modules; Hybrid Modules - ABB SM2000 User Manual

4.7.2 3-Relay and 6-Relay Modules

A:- Analog I/P B: Relay
Alarm 1.1A, Positive
Relay B1
Totalizer 1.2 Intermediate,
Relay B2
None, Positive
Relay B3
None, Positive
Relay B4
None, Positive
Relay B5
None, Positive
Relay B6

4.7.3 Hybrid Modules

A:- Analog I/P B:-Relay
Digital outputs C1 + C2 None, None
Digital Outputs C1 and C2
D5 Source None
D5 Polarity Positive
D6 Source None
D6 Polarity Positive
Digital outputs C3 + C4 None, None
Digital outputs C5 + C6 None, None
C:-Hybrid
C: Hybrid
The Relay Source is a digital source used to energize/
de-energize the relay.
Note. If the relay is used to provide a totalizer count pulse,
the maximum pulse frequency is 5Hz. Consideration must
also be given to the mechanical life of the relay.
When the polarity is set to Positive, the relay is energized
when the digital source is active (On).
The digital output source is the internal digital source that is
used to activate/de-activate the digital output.
When the polarity is set to positive, the digital output is
energized when the digital source is active (On).
4 CONFIGURATION...
77