Managing Linearization Tables - ABB LLT100 Operating Instructions Manual

LLT100
Laser level transmitter
8.3

Managing linearization tables

Once you have completed the linearization setup, you can
save that setup or go back to factory settings if you prefer.
8.3.1 Saving a linearization table
To save a linearization table:
1. From the Device Setup menu, select Linearization >
Configure Tables >Save.
2. From the Configure Tables screen, press OK.
The linearization table is saved.
8.3.2 Resetting to default linearization table
If you modified the linearization table and realize that your
configuration should not be saved, it is possible to revert the
default (empty) linearization table.
To revert to the default linearization table:
1. From the Device Setup menu, select Linearization >
Configure Tables > Reset.
2. From the Configure Tables screen, press OK.
The linearization table is reset to its default empty setting.
26 User Guide | OI-LLT100-EN Rev. D