Specifications - ABB LLT100 Operating Instructions Manual

LLT100
Laser level transmitter

Specifications

Dust tube
Base plate diameter
Length
Material
Gasket material
Function
Purge
Purge air flow
Purge fitting
Flange reducer
Side A
Side B raised face
Side B flat face
Material
Adjustable swivel mount
Outer diameter
Mounting bolt pattern
Tilt angle for aiming
Material
Adjustable pivot bracket
Overall dimensions
Opening diameter
Mounting plate thickness
Mounting bolt
Reflector
Function
Size
Material
Cable glands and stopping plugs
Description
Demo kit
Description
External laser pointer tool
Function
Pointing laser
Pointing laser safety
58 User Guide | OI-LLT100-EN Rev. D
165 mm (6.5 in.) mounts on LLT100 standard flange
257 mm (10.1 in.)
Epoxy powder-coated stainless steel
Black compressible Buna-N rubber durometer rating shore 60A
Static air space prevents dust buildup, can be purged.
Offset from hot process interface to allow convection cooling, can be purged.
Must be oil free dry air
recommended flow between 0.5 and 4 l/minute
maximum inlet pressure 5.5 bar (80 psi)
∕ NPT
1
8
2 in. ANSI class 150 raised face flange
3 in. ANSI 4 in. ANSI
class 150 class 150
3 in. ANSI 4 in. ANSI
class 150 class 150
304 Stainless steel
210 mm (8.3 in.)
3 bolt holes, 10 mm (0.4 in.) diameter
Continuously adjustable from 0° to 6°
Aluminum
185 mm (7.3 in.) × 249 mm (9.8 in.) × 55 mm (2.2 in.)
60 mm (2.4 in.)
5 mm (0.2 in.)
4 × HHCS 5/8-11 × 2 SS, + 8 × Washers + 2 × lock washers + 4 × nuts, bolt hole 8 × 18 mm (0.7 in.)
Reflective panel for positioning applications up to 200 m
90 cm × 90 cm (36 in. × 36 in.)
Aluminum with reflective paint
Ex cable glands with ½ in. NPT or M20 thread size
Ex C1/D1 cable glands with ½ in. NPT or M20 thread size
Rugged carrying case with LLT100, dust tube, battery pack, laser pointer tool
Laser pointer accessory used for targeting and aiming purpose.
650 nm wavelength
Less than 1 mW output power
Class 2M
DN50 PN40 raised face flange
6 in. ANSI DN80 PN40
class 150
6 in. ANSI DN80 PN40
class 150
DN100 PN40 DN150 PN40
DN100 PN40 DN150 PN40