Table of Contents
Advertisement
Command Descriptions
DISPlay:MARKer:PEAK:SEParation (?)
Group
Related Commands
Syntax
Arguments
Responses
Examples
DISPlay:MARKer:SELect (?)
Group
Related Commands
Syntax
Arguments
2 26
The DISPlay:MARKer:PEAK:SEParation command sets the interval used by the
peak detection feature. The DISPlay:MARKer:PEAK:SEParation? query returns
the current setting of the interval.
DISPLAY
None
DISPlay:MARKer:PEAK:SEParation <numeric value>
DISPlay:MARKer:PEAK:SEParation?
<numeric value>::=<NR1>
where <NR1> is the peak detection interval ranging from 1 % to 10 %.
<NR1>
:DISPLAY:MARKER:PEAK:SEPARATION 4
sets the peak detection interval to 4 %.
The DISPlay:MARKer:SELect command selects the active marker when two
markers (MARKER1 and MARKER2) are displayed on a waveform. The
DISPlay:MARKer:SELect? query returns which marker is currently active.
DISPLAY
DISPlay:MARKer:TYPE
DISPlay:MARKer:SELect {MARKer1|MARKer2}
DISPlay:MARKer:SELect?
MARKer1
selects MARKER1 ( marker).
MARKer2
selects MARKER2 ()marker).
3026 Programmer Manual
Advertisement
Table of Contents
