Table of Contents
Advertisement
Status and Events
Messages
3 8
Tables 3-3 through 3-6 show the codes and messages used in the status and event
reporting system in the realtime spectrum analyzer.
Event codes and messages can be obtained by using the queries :SYSTem:ER-
Ror? and :STATus:QUEue[:NEXT]?. These are returned in the following format:
<event code>,"<event message>"
Table 3-3 shows the messages generated when there is a syntax error in the
command.
Table 3-4 shows the messages generated when an error is detected while a
command is being executed.
Table 3-5 shows the messages generated when an internal instrument error is
detected. When this type of error occurs, it may be due to a hardware problem.
3026 Programmer Manual
Advertisement
Table of Contents
