Display Irf Topology - HP 12500 series Command Reference Manual

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display IRF link information.
<Sysname> display irf link
Member 1
IRF Port
1
2
Member 2(IRF-Link-Down: MDC2, MDC3)
IRF Port
1
2
Table 3 Command output
Field
Member ID
(IRF-Link-Down: MDC2,
MDC3)
IRF Port
Interface
Status
Related commands
irf link-status detect enable

display irf topology

Use display irf topology to display the IRF fabric topology.
Interface
disable
GigabitEthernet1/3/0/1(MDC1)
GigabitEthernet1/5/0/1(MDC2)
GigabitEthernet1/6/0/1(MDC3)
Interface
GigabitEthernet2/3/0/1(MDC1)
GigabitEthernet2/5/0/1(MDC2)
GigabitEthernet2/6/0/1(MDC3)
disable
Description
IRF member ID.
The IRF links on MDC2 and MDC3 are down. Because of this, the network
ports assigned to MDC2 and MDC3 are also shut down.
IRF port number:
•
1—IRF-port 1.
•
2—IRF-port 2.
Physical ports bound to the IRF port, and their respective MDCs. If no
physical port has been bound to the IRF port, this field displays disable.
Link state of IRF physical ports:
•
UP—Link is up.
• DOWN—Link is down.
• ADM—The port has been manually shut down with the shutdown
command.
•
ABSENT—Interface module that hosts the port is not present.
Status
--
UP
ADM
DOWN
Status
UP
DOWN
ADM
--
5