Display Restricted Port; Irf Auto-Merge Enable - HP 12500 series Command Reference Manual

Field
Excluded ports(configurable)
Excluded ports(can not be
configured)

display restricted port

Use display restricted port to display the restricted ports.
Syntax
display restricted port [ chassis chassis-number [ slot slot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
chassis chassis-number [ slot slot-number ]: Specifies an IRF member device or a card in the IRF
fabric. The chassis-number argument represents the ID of an IRF member device, and the
slot-number argument represents the slot number of a card. If an IRF member device is specified
but a card is not specified, this command displays all restricted ports on that device. If neither IRF
member ID nor card slot number is specified, this command displays all restricted ports in the IRF
fabric.
Usage guidelines
The restricted ports in an IRF fabric cannot receive or forward multicast packets.
Examples
# Display the restricted ports on the card in slot 4 of IRF member 1.
[Sysname]display restricted port chassis 1 slot 4
Chassis: 1
slot: 4
restricted port:
GigabitEthernet1/4/0/1 GigabitEthernet1/4/0/2

irf auto-merge enable

Use irf auto-merge enable to enable auto reboot for IRF fabric merge. The function enables an IRF
fabric to automatically reboot its member devices when it is defeated in the master election during
an IRF fabric merge.
Use undo irf auto-merge enable to disable this function.
Description
Ports manually configured to not shut down when the IRF fabric
transitions to the Recovery state.
Ports set by default to not shut down when the IRF fabric transitions to
the Recovery state.
8