Mitsubishi Electric CP-C60DW-WE Operation Manual page 13

BEFORE OPERATION
Press the POWER switch on the side panel to turn on the
power.
After the POWER indicator's color has changed from orange to
green, press the OPEN button to release the printing unit out.
Remove the paper strip bin and then pull the knob to open the
door.
Install the print paper into the unit.
Place the printing paper in the correct orientation.
Do not push down on the printing unit or the door.
If you push down on the printing unit or the door when they are open, this unit may
fall and it can cause damage or injury.
print paper. Otherwise, a paper jam may occur.
along the ditches, the unit or accessories may be
damaged.
Remove the sticker and insert the print paper between the roller
and guide as shown right to feed it. When the buzzer sounds,
stop the paper feeding.
sure to insert the paper straight.
Buzzer continues to sound until the printing unit is closed.
Close the door.
CAUTION
NOTE
NOTE
NOTE
POWER switch
OPEN button
Direction of paper insertion
Roller
Guide
Knob
Print paper
Roller
10