BEFORE OPERATION
Load the ink ribbon in the ink cassette as shown below.
3
1
Shaft
Place the ink cassette containing the ink ribbon in the
position as shown in the illustration.
cassette with the right and left guides inside the printing unit and slide it in
a slanting direction.
Do not touch the thermal head.
Fingerprints or dust on the thermal head will degrade the print quality.
Do not touch the thermal head right after printing because it is
extremely hot. Otherwise you may get burned or injured.
Note that the thermal head is quite sensitive to static electricity. When
you touch the thermal head while carrying static electricity on your
body, the thermal head may be damaged.
INK RIBBON INSTALLATION
NOTE
4
3
Ditch
2
1
Handle
NOTE
CAUTION
NOTE
4
2
Handle
Guides
Protrusion
11