Motorola SVG2500 User Manual page 14

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

2 INSTALLATION

9. Click Yes to continue the installation. The Found New Hardware Wizard window is

displayed.

10. Click Finish to complete the installation.

When you finish setting up the USB driver, you can continue with

If you have any difficulties setting up the USB driver, perform

Driver in Windows 2000

Installing the Windows XP USB Driver

1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. This CD contains

the USB drivers and must be inserted and read by the PC before you connect the

SVG2500 to the PC.

2. Connect the USB cable as shown in USB Connection.

A few seconds after you complete the USB connection, the Found New

Hardware Wizard window is displayed.

3. Be sure Install the software automatically is selected.

Motorola USB SVG Modem

and repeat the setup procedure.

Configuring TCP/IP

Removing the USB