Motorola SVG2500 User Manual page 36

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

2 INSTALLATION

The following image is from Adobe Acrobat Reader® version 7 .0 running on

Windows 2000; there may be slight differences in your version.

To print the template only, select Current page as the Print Range. Be sure you print

the template at 100% scale. Be sure No Scaling is selected for Scale to paper size.

3. Click OK to print the template.

4. Measure the printed template with a ruler to ensure that it is the correct size.

5. Use a center punch to mark the center of the holes.

6. On the wall, locate the marks for the mounting holes.

7. Drill the holes to a depth of at least 1 1/2 inches (3.8 cm).

Caution!

Use M3.5 x 38 mm (#6 x 1

screw head diameter of 7 .0 mm to mount the SVG2500.

Before drilling holes, check the structure for potential damage to water, gas, or electric

lines.

If necessary, seat an anchor in each hole.

inch) screws with a flat underside and maximum