Motorola SVG2500 User Manual page 21

This document is uncontrolled pending incorporation in PDM
2 INSTALLATION
Linux
To retrieve the IP Address, do the following on each client computer running Linux:
1. Type at the system prompt to log in as super-user.
su
2. Type
ifconfig
3. Type
pump -i <dev>
where <dev> is the network device name
4. Type
ifconfig
5. Check to make sure no firewall is active on the device <dev>.
Macintosh or UNIX
Follow the instructions in the applicable user documentation.
Configuring TCP/IP
Make sure all client computers are configured for TCP/IP which is a protocol for
communication between computers. Perform one of the following for the operating
system you are running:
•
Configuring TCP/IP in Windows 2000
•
Configuring TCP/IP in Windows XP
•
Configuring TCP/IP in Windows Vista
•
For Macintosh or UNIX systems, follow the instructions in the applicable
Macintosh or UNIX user documentation.
After configuring TCP/IP on your computer, you must verify the IP address. Perform
one of the following:
•
Verifying the IP Address in Windows 2000 or Windows XP
•
Verifying the IP Address in Windows Vista
•
For Macintosh or UNIX systems, follow the instructions in the applicable
Macintosh or UNIX user documentation.
to display the network devices and allocated IP addresses.
.
again to view the new allocated IP address.
35