Table of Contents
Advertisement
1.
Before You
Begin
Gather the proper tools before you
begin:
•
Small (No
.
1) Phillips-head screwdriver
•
Medium (No
.
2) Phillips-head screwdriver
•
Small flathead screwdriver
•
Medium flathead screwdriver
•
MS-DOS®
CD-ROM Extensions diskette and Installation Guide for
MS-DOS CD-ROM Extensions software
•
MS-DOS 3.1 or later
•
OCLC Check CD Program 3.00 diskette
•
PASSPORT
R
Software (working diskette or hard-drive copy) and the
PASSPORT Software User Guide
•
Labels and a pen or pencil to label the cables
Before you remove your controller board from its
package,
ground your-
self
by
touching the metal portion of a table or
chair,
so you do not
transmit a static charge to the board or
workstation.
As you unpack your controller board and CD drive, inspect them for ob-
vious defects or shipping damage.
If
either is
damaged,
call OCLC User
&
Network Support to request a
replacement.
2.
Disconnect Cables and Remove System Unit Cover
2
1
Turn off the power to your workstation and
unplug
it.
2
3
4
5
If
you do not turn off and unplug the workstation, you can electro-
cute
yourself.
If
you have a CD and/or CD drive case attached to your worksta-
tion,
do not remove the cable that connects your CD drive and/or
CD drive case to your workstation until step 9 of this
section.
Use the small flathead screwdriver to disconnect the monitor cable
and other cables as
necessary.
Label all of the cables as you discon-
nect
them.
This helps you properly reattach
them.
Set the monitor,
keyboard,
and peripherals aside.
Follow the directions in your Workstation User Guide to remove
the system unit
cover.
If
you remove
any screws,
be sure to set
them aside in a safe place
.
Avoid catching the cover on any wires
or cables inside the unit. Set the cover aside.
•
If
you do not already have a CD drive case and/or CD drive
attached to your
workstation,
skip steps 6 through 10, and
continue from section 3 where you install the CD controller
board and drive
.
•
If
you already have a CD drive case and/or CD drive attached
to your workstation, continue from step 6.
Hitachi 3700 CD
Drive
Installation Instructions
•
•
•
Advertisement
Table of Contents
