Mitsubishi Electric A1SJ71DN91 User Manual page 40

3. SPECIFICATIONS
Error Code
Hexadecimal Decimal
0000 to 0001 0 to 1
H H
0002 2
H
0003 to 0007 3 to 7
H H
0008 8
H
0009 9
H
000A 10
H
000B 11
H
000C 12
H
000D 13
H
000E 14
H
000F 15
H
0010 16
H
0011 17
H
0012 18
H
0013 19
H
0014 20
H
0015 21
H
0016 22
H
0017 23
H
0018 24
H
0019 25
H
001A to 001E 26 to 30
H H
001F 31
H
0020 32
H
0021 to 0027 33 to 39
H H
0028 40
H
0029 41
H
002A to 00CF 42 to 207
H H
00D0 to 00FF 208 to 255
H H
2) Table 3.14 shows the DeviceNet general error codes
Table 3.14 Table of DeviceNet General Error Codes
Error Name
Reserved
Resource unavailable
Reserved
Service not supported
Invalid attribute value
Reserved
Already in requested mode/state
Object state conflict
Reserved
Attribute not settable
Privilege violation
Device state conflict
Reply data too large
Reserved
Not enough data
Attribute not supported
Too much data
Object does not exist
Reserved
No stored attribute data
Store operation failure
Reserved
Vendor specific error
Invalid parameter
Future extensions
Invalid Member ID
Member not settable
Reserved
Reserved for Object Class and
service errors
Reserved by DeviceNet.
The requested service could not be run as the required resource
was not free.
Reserved by DeviceNet.
The requested service is not supported. Or, the requested service
is undefined in the designated object class or instance.
Abnormal attribute data in the requested service.
Reserved by DeviceNet.
The designated object is already transferred to the requested mode
or status.
The designated object was not in a status to execute the requested
service.
Reserved by DeviceNet.
An unchangeable attribute was designated for the requested
setting service.
The service request destination has no access rights.
The designated device was not in a status to execute the requested
service.
The response data length exceeded the processable data length.
Reserved by DeviceNet.
The requested service did not supply sufficient data for processing.
The requested service designated an undefined attribute.
The requested service included invalid data.
The requested service designated an unmounted object.
Reserved by DeviceNet.
The object attribute data was not saved before the service was
requested.
The object attribute data was not saved due a problem during the
save processing.
Reserved by DeviceNet.
An error specific to a vendor occurred. The "Additional error code"
area (0134 ) of the error response shows the specific error. The
H
error code is used only when any of the error codes shown in this
table or within the object class definition does not correspond to the
relevant error.
A parameter problem occurred with the requested service. This
code is used if the parameter does not meet the requirements in
this specification of DeviceNet or the important conditions defined
in the application object specifications.
Reserved by DeviceNet.
The member ID of the requested service designated an unmounted
class, instance, or attribute.
An unchangeable member was designated for the requested
setting service.
Reserved by DeviceNet.
Error codes in this range are used to represent errors unique to
object classes. The codes of the range are used only when any of
the error codes shown in this table do not correctly explain the error
that has occurred. "DeviceNet general error code" area (0133
may be explained in further detail using the "Additional error code"
area (0134 ).
H
−
3 18
MELSEC-A
Description
)
H