Silvercrest SLTG 1100 A1 Operating Instructions Manual page 14

WARNING! RISK OF INJURY!
► Allow the toaster to cool before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE!
► Do not use aggressive or abrasive cleaning agents. These can damage the
surfaces of the appliance.
■ Clean the appliance housing using only a dry or lightly moistened cloth.
■ To avoid the risk of fire, empty the crumb tray
■ Proceed as follows to clean the viewing window
–
Ensure that the appliance is unplugged, the appliance has cooled down
and the crumb tray
–
Lay the toaster on its side so that the viewing window
upwards.
–
Reach into the viewing window release
At the same time, pull out the viewing window
–
Clean the viewing window
liquid. Rinse it afterwards in clear water.
–
Dry it well with a dry cloth. The viewing window
dry before it is replaced in the appliance.
–
Push the viewing window
window release
SLTG 1100 A1
is empty before doing this!
in warm water with a little washing-up
back into the appliance so that the viewing
clicks into place.
at regular intervals.
.
is facing
and press it together a little.
.
must be completely
GB│IE│NI
│
11 ■