Select The Equaliser; Aux / Hdmi Arc / Optical / Coaxial Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Silvercrest SSBS 36 A1 User Manual

Select the Equaliser

While playing, press the EQ button repeatedly on the unit or press the FLAT, TV, CINEMA, SONG
-
buttons on the remote control to select preset equalisers.

AUX / HDMI ARC / OPTICAL / COAXIAL Operation

- Ensure that the unit is connected to the TV or audio device.
1 Press the button repeatedly on the unit or press the AUX1, AUX2, HDMI ARC, OPTICAL, COAXIAL
buttons on the remote control to select the desired mode.
2 Operate your audio device directly for playback features.
3 Press the VOL +/– button to adjust the volume to your desired level.
Tip: While in HDMI ARC/OPTICAL/COAXIAL mode, if there's no sound output and the status indicator is
flashing, you may need to activate PCM output on your source device (eg. TV, DVD or Blu-ray player).
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.

Pair Bluetooth-enabled Devices

• The operational range between the main unit and a Bluetooth device is approximately 8 meters.
• Before you connect a Bluetooth device to this unit, familiarize yourself with the Bluetooth capabilities of
the device.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• Keep this unit away from other electronic devices that may cause interference.
To connect your device to the unit via Bluetooth, follow the steps below:
1 During ON mode, press the
select Bluetooth mode. The Blue indicator will flash slowly.
2 Activate your Bluetooth device and select the search mode. "IAN 288637" will appear on your
Bluetooth device.
• If you cannot find the unit, press and hold the
has entered pairing mode. You will hear "PAIRING" from the unit and the Blue indicator will flash fast.
3 Select "IAN 288637" in the pairing list. After the "Paired" voice prompt, the system is successfully
connected and the Blue indicator will light up solidly.
4 Play music from the connected device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the "Disconnected" voice prompt.
- Press and hold the
Tips:
• Enter "0000" for the password if necessary.
• If there is an existing connection, press and hold the
re-activate the pairing mode, the existing connection will be interrupted, the Blue indicator will flash.

BLUETOOTH Operation

button repeatedly on the unit or press the BT (Bluetooth) button to
PAIR button on the remote control.
BF /
PAIR button on the remote control. The system
BF /
/PAIR button on the remote control to
BF
- 10 -