Time Zone - Dell 2350 User Manual

Enable DHCP Server Functions
By default, the Wireless 2350 is set to function as a DHCP server. If you are installing the unit
on an existing network that already has a DHCP server or simply do not want the Wireless
2350 to function as the network's DHCP server, click to deselect Enable DHCP Server
Functions to disable the DHCP server function.
IP Address Pool Range
The IP Address Pool Range section provides a means of controlling a low and high value for
the IP addresses on a network. Use the indicated fields to define the range of IP addresses
you would like the Wireless 2350 to provide to DHCP clients. The valid range of numbers you
should enter is between 1 and 254.
The lease time is the amount of time a user will be allowed to use the IP address assigned by
the DHCP server. You may specify the lease time that DHCP server offers for the client to use
the IP address. This setting is especially useful on campuses or other environments where
users change frequently.
IP Address Reservation
Specific IP addresses may also be reserved for particular devices in a network. The IP
Address Reservation fields allow you to reserve up to 20 IP addresses for a specific system.
The MAC Address field is the physical address of the network card on the client computer.
Use the input fields under IP Address to indicate the IP address for those devices that should
use a manually defined IP address.

Time Zone

Time Zone