Parental Control - Dell 2350 User Manual

7. Repeat the steps above for each Dell Wireless 2350 Broadband router you want to
bridge.
NOTE: Ensure all Wireless 2350 routers are set to same wireless settings. Also, all
router(s) not directly connected to Internet should be configured to Access Point
mode.
Restore Defaults
If you have customized your wireless system configuration, you can restore the wireless
settings to factory defaults by clicking the RESTORE DEFAULTS button.

Parental Control

IP filtering is a mechanism enabling a networking node to accept or deny certain types of IP
datagrams based on the IP address, port number, protocol type, and other criteria.
1. Click the Add button. A pop-up Parental Control Rule window will appear.
2. Click to select the IP address of the particular computer you want to control (for
example, your child's computer) in the IP Address list.
3. To block or grant access to the Internet during a period of time, specify the start and
end time from the Time Restriction list.
4. Click to select Allow or Deny from the Internet Access list.
Parental Control