Silvercrest RT2000 BT Operating Manual page 59

turns and tightens the pressure piece. Fit the device on
the radiator and perform an adaptation.
Fault message E2 appears in the
display. The radiator valve stroke is too short
or the battery power is too weak. Adapt the device
once again. Change the batteries.
Fault message E3 appears in the
display. No valve movement is possible. Can
the valve plunger be moved freely? Try and make the
valve plunger moveable, if possible.
If fault message E1, E2 or E3 appears in the display
and you have cleared the fault, press any button
to clear the message. The device is automatically
adapted again and it can then be used as normal.
Due to the continuous thread, the
pressure piece fi tted on the underside
can drop out if the regulator has not
been mounted on the valve. Insert the
pressure piece. The continuous thread
61
