Phasor Measurement Unit Records; Product Information; Model Information - GE G60 Instruction Manual

PRODUCT INFORMATION

The
OLDEST SAMPLE TIME
full, at which time it starts counting at the defined sampling rate.
The
NEWEST SAMPLE TIME
rate. If the data logger channels are defined, then both values are static.
See the
COMMANDS  CLEAR RECORDS

6.5.5 Phasor Measurement Unit records

ACTUAL VALUES  RECORDS  PMU RECORDS
 PMU
 RECORDS
The number of triggers applicable to the Phasor Measurement Unit recorder is indicated by the
The status of the phasor measurement unit recorder is indicated as follows.
ACTUAL VALUES  RECORDS  PMU RECORDS  PMU 1 RECORDING
 PMU 1
 RECORDINg
6
6.6 Product information

6.6.1 Model information

ACTUAL VALUES  PRODUCT INFO  MODEL INFORMATION
 MODEL INFORMATION

6-32
NEWEST SAMPLE TIME:

2000/01/14 15:21:19
represents the time at which the oldest available samples were taken. It is static until the log gets
represents the time the most recent samples were taken. It counts up at the defined sampling
menu for clearing data logger records.
NUMBER OF TRIGGERS:

0
 PMU 1

 RECORDING
PMU 1 FORCE TRIGGER:

Yes
PUM 1 AVAILABLE

RECORDS: 0
PUM 1 SECONDS

PER RECORD: 0.0
PUM 1 LAST CLEARED:

2013/07/14 15:40:16
ORDER CODE LINE 1:

G60-A00-AAA-A0A-A0A-
ORDER CODE LINE 2:

A0A-A0A-A0A
ORDER CODE LINE 3:

ORDER CODE LINE 4:

SERIAL NUMBER:

ETHERNET MAC ADDRESS

000000000000
MANUFACTURING DATE:

CHAPTER 6: ACTUAL VALUES
Range: 0 to 65535 in steps of 1
See below
NUMBER OF TRIGGERS
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: YYYY/MM/DD HH:MM:SS
Range: standard GE order code format
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: up to 20 alphanumeric characters
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
G60 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
value.