GE G60 Instruction Manual page 747

APPENDIX D: MISCELLANEOUS
Page Description
--- Added graphical front panel option to order codes and specifications in chapter 2, Interfaces chapter 4, Settings chapter 5,
Actual Values chapter 6
--- Added PEAP-GTC and PAP protocols for authenticating user logins when using a RADIUS server. Added to Settings > Product
Setup > Security > RADIUS Authentication Method and to Modbus memory map and F codes.
--- Updated Contact Inputs from 96 to 120 and Contact Outputs from 64 to 72 in Product Description in chapter 2 and FlexLogic
operands table in chapter 5
--- Updated Current CT Settings number from 4 to 6 in FlexLogic operands table, settings, features per product table, and
Modbus memory map
--- Updated Phase Instantaneous Overcurrent number from 4 to 12 in FlexLogic operands table, settings, features per product
table, Modbus memory map
--- Updated Phase Time Overcurrent number from 2 to 6 in FlexLogic operands table, settings, features per product table,
Modbus memory map
3-37 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)
3-69 Added Connect to a D400 Gateway section
4-43 Updated LED Labelling instructions for the new Front Panel Label Designer
4-48 Added Standard Front Panel section for labelling LEDs and pushbuttons
5-106 Added USB Port section to enable/disable the USB port on the graphical front panel
5-122 Updated User-programmable Pushbuttons section as per specifications
5-145 Updated Breakers section as per specifications
5-150 Updated Disconnect Switches section as per specifications
5-288 Updated the Stator Ground and Field Ground Fault Protection settings sections to be consistent with GPM instruction manual
(SH stator ground, field ground fault protection, field current)
10-7 Added Saturation Detector section to Theory of Operation chapter
11-5 Added Convert Device Settings section
11-7 Added Copy Settings to Other Device section
11-15 Added Replace Front Panel section for retrofit with the new graphical front panel
Table D-3: Major changes for G60 manual version AE3 (English)
Page Description
--- General revision
2- Updated order codes
5-151 Updated PMU Basic Configuration settings
11-5 Added Copy Settings to Other Device section
Table D-4: Major changes for G60 manual version AE1 (English)
Page Description
--- General revision
--- Added routable GOOSE content in chapters 2 and 5
3-37 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)
4- Added Engineer content
5- Updated IEC 61850 content
A- Updated FlexAnalog table for most UR products
Table D-5: Major changes for G60 manual version AC1 (English)
Page Description
--- General revision. Added online help and updated generic online help.
--- Deleted EAC logo from title page and deleted EAC certification from Approvals specifications because document not
translated into Russian
G60 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
REVISION HISTORY
D
D-3