Charging The Speaker; Handling And Use; Switching The Speakers On/Off - Silvercrest SKBL 56 A1 Operating Instructions Manual

Charging the speaker

CAUTION
► Charge the speakers only in dry interior spaces.
Before using the speakers, the integrated batteries must be completely
charged.
♦ Make sure that the speakers are switched off. If a device is switched
on, the operating/charging LED
button for approx. 2 seconds to switch off a device.
♦ Connect the USB plugs on the charger cables
power supply.
♦ Connect the micro-USB plugs on the charger cables
cro-USB charging sockets (POWER INPUT)
NOTE
► The operating/charging LED
When the battery is fully charged, the charging LED turns off.
SKBL 56 A1
lights up. Press the
to a PC or to a USB
to the mi-
on the speakers.
lights up orange during recharging.
NOTE
► Charging takes about 3 hours at a charging current of 500 mA. When
the battery is fully charged, you can play back music for about 4 hours
at a medium volume. The playback time may vary depending on usage
(volume).
► When the battery is empty, you will hear two beeps at intervals of just
a few seconds, and the operating/charging LED
twice every 15 seconds. The device then switches off automatically.

Handling and use

This section provides you with important information on handling and using
the device.
Switching the speakers on/off
♦ Press and hold the
speaker on and activate the Bluetooth
and the operating/charging LED
blue.
flashes orange
button for about 2 seconds to turn a
® function. You will hear a beep
flashes alternatively orange and
GB│IE│NI │ 7 ■