Before Using The Device For The First Time; Charging The Neckband Speaker - Silvercrest SNL 15 A1 Operating Instructions Manual

6. Before using the device for the fi rst
time
6.1.

Charging the neckband speaker

 Remove the neckband speaker from the packaging.
 Ensure that all packaging materials have been removed.
 Open the micro-USB compartment and connect the neckband
speaker to a USB power supply with an output current of at least
1000 mA using the supplied USB cable.
As soon as the neckband speaker is connected to a power source, the
built-in rechargeable battery begins charging automatically.
The battery charging time is about 3 hours.
The charging LED lights up red during charging.
The charging LED goes out as soon as the built-in battery is fully charged.
The operating LED flashes slowly if the battery charge level is
too low and the battery needs to be charged.
 Remove the USB cable and close the micro-USB compartment as
soon as the battery is fully charged.
NOTICE!
Possible material damage!
Risk of damage to the device due to impro-
per use of the device.
 Do not use a standard USB 2.0 or USB 3.0 port, such
as on a PC or notebook, to charge the device. Only
use an external USB power supply with an output cur-
rent of at least 1000 mA.
16 – English