Flex States; Iec 61850 Goose Integers; Ethernet - GE L30 Instruction Manual

6.2 STATUS
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
 FLEX STATES

There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
PATH: ACTUAL VALUES
 IEC 61850
 GOOSE UINTEGERS
6
The L30 Line Current Differential System is provided with optional IEC 61850 communications capability.
This feature is specified as a software option at the time of ordering. Refer to the Ordering section of chap-
ter 2 for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO5 integer input data points are displayed in this menu. The GGIO5 integer data values are received
via IEC 61850 GOOSE messages sent from other devices.
PATH: ACTUAL VALUES
 ETHERNET

These values indicate the status of the primary and secondary Ethernet links.
6-8
 
STATUS

FLEX STATES

PARAM
Off
PARAM
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
 
STATUS IEC 61850 GOOSE UINTEGERS
UINT INPUT
UINT INPUT
MESSAGE
UINT INPUT 16
MESSAGE
 
STATUS

ETHERNET

ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
MESSAGE
STATUS: OK
L30 Line Current Differential System
Range: Off, On
1: Off
Range: Off, On
2: Off
↓
Range: Off, On
1
0
2
0
↓
0
Range: Fail, OK
Range: Fail, OK
6 ACTUAL VALUES
6.2.13 FLEX STATES

6.2.14 IEC 61850 GOOSE INTEGERS

6.2.15 ETHERNET
GE Multilin