Local Side Configuration - Dell S2815dn Installation And Configuration Manual

Step 4 – Configure Default Domain
This field is used for DNS Server Name resolution. Set this to the
Default Domain name for the LAN.
Step 5 – Press Update

Local Side Configuration

These settings define the IP addresses used for Local communication
between the CACStar and the MFD/printer. The defaults are likely to
be acceptable. Usually there is no need to enter any IP addresses on
this configuration page.
Make sure these values were entered into the MFD using the
MFD/printer operator panel.
CACStar User Guide Rev A27
Copyright 2017 Digital Imaging Technology Page 12