Dell S2815dn Installation And Configuration Manual page 20

authentication to the SMB server if so configured. Multiple entries
are allowed.
KDC Server IP:
KDC Server Port:
The default is 88.
KDC Realm:
KDC Realm Domains:
to the realm, and is usually only needed if multiple realms
are defined. You can enter one or more host names or
domain names prefixed by a period and separated by
commas.
KDC Principal:
CN or the EDI-PI, or San Principal.
PKINIT Win2K:
The setting affects the "Public Key Cryptography for Initial
Authentication" in Kerberos. Check this box if you are using a
Windows 2000 KDC Server and/or need to use the older
Kerberos PKINIT command/reply set.
Disable Reverse DNS Lookups:
Check this box to disable Reverse DNS Lookups by Kerberos
(and LDAP). This is only necessary if there is a problem using
Reverse DNS Lookups. If this box is checked, host names
must be used for "KDC Server" and "LDAP Server" input
fields.
MFD LDAP Kerberos Proxy:
If enabled and Kerberos is enabled, LDAP searches from the
MFD will be modified to use Kerberos Authentication. The
LDAP Server and Port settings must be correct.
MFD SMB Kerberos Proxy:
If enabled and Kerberos is enabled, network scan (SMB)
operations from the MFD will be modified to use Kerberos
authentication.
CACStar User Guide Rev A27
Copyright 2017 Digital Imaging Technology
IP address of the Kerberos server
Port number of the Kerberos server.
Kerberos Realm
This setting is used to map domains
User Name. This can be either the
Page 20