Introduction - Dell S2815dn Installation And Configuration Manual

Introduction

CACStar™ provides a solution to HSPD-12 requirements for
CAC/PIV based protection of network data to and from printers or
Multifunction Devices (MFDs). You can configure it to require an
authenticated CAC/ PIV card to control Copy, Print, Fax, Scan to
Folder, Scan to Email, SNMP, or FTP.
Configurable authentication methods include Basic X.509 certificate
on the card, PIN validation, expiration, OCSP, root certificate, LDAP,
and Kerberos. CACStar will adopt the IP address of the MFD on
which it is installed, so there is no host network configuration change
necessary.
Configuration is easily done using secure web based access to
CACStar by the network administrator. In its simplest form, the
admin only needs to configure the IP address of the MFD and the IP
address of the local time server. Information about many additional
configuration options is described later in this guide.
Prior to starting the CACStar configuration, you must know your
network infrastructure. Appendix A has a convenient list of questions
and the necessary data that you will need to collect.
If you need help obtaining correct firmware or documentation,
contact the Dell ProSupport Help Desk by calling 1-866-516-3115, or
by sending email to Imaging_Solutions_Support_CAC@dell.com.
This manual will guide you through installing the hardware, installing
the software to convert the Dell S2815dn to be CACStar enabled, and
configuration of the customer desired authentication control
options.
CACStar User Guide Rev A27
Copyright 2017 Digital Imaging Technology Page 5