Advertisement
Precautions with regard to safety
CAUTION
Be sure to use the projector with the ACF unit installed.
Sucking dust or dirt may cause troubles to the projector.
●
If the ACF unit is not installed, power will be automatically shut down.
Replacing the ACF
Before replacing the ACF
Press the power button twice to turn off the projector.
●
(The power indicator will turn orange.)
Wait until the cooling fan stops and the POWER indicator turn to RED.
●
Disconnect the mains plug from the mains socket.
●
Prepare a Phillips-head screw driver.
●
Replacement procedure
Indicated replacement procedure below is for F300 series projectors. For the
other series of projector, refer the Operating Instructions that is provided
with your projector.
1 . Turn the projector upside down and place it gently on a soft cloth.
2. Use a Phillips-head screwdriver to loosen 3 ACF cover fixing screws until
the screws turn freely and remove the ACF cover.
2-E
NGLISH
ACF cover fixing screw
Soft cloth
ACF cover
Advertisement
