Advertisement
3. Hold the pushes of the locking detents inward with fingers to release the
lock, and pull out carefully the "ACF unit" from the body.
* When you replace the ACF unit, clean the compartment and/or the Air
exaust port if you need to.
4. Insert a new " ACF unit " into the compartment until it catches the both
locking detents.
5. Attach the ACF cover and tighten the ACF cover fixing screws securely
with a Phillips-head screwdriver.
6. Once the " ACF unit " has been replaced, press and hold the [ENTER]
button for about three seconds on the [FILTER COUNTER RESET]
submenu which can be selected from the [PROJECTOR SETUP] menu.
7. Press I to select OK and press the ENTER button to reset the FILTER
REMAINING to "0".
Notice:
Use this product with the "ACF unit" installed. If you use the projector with-
out the unit, the power will be shut off in order to prevent a possible failure
due to the collected dust and dirt.
Pushes
Locking detents
Pushes
unit
ACF
E
-3
NGLISH
Advertisement
