Panasonic U-8ME1E81 Service Manual page 138

3. Remote Controller Servicing Functions
3. Remote Controller Servicing Functions
<Function of CZ-RTC3>
Display of "maintenance function" screen
1 Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
2 Press the
menu.
If you wish to see the next screen instantly, press
the or
List of Servicing Functions
Functions
Test run
Sensor temperature
display
Servicing check
display
Simple settings
Detailed settings
5
Automatic address
, and
or button to see each
button.
Description
Operation with forced
thermostat ON
Temperature display from
each sensor
Alarm history display
Filter lifetime, operating
mode priority, central control
address, and other settings
System address, indoor
unit address, central control
address, and other settings
Automatic address setting
based on command from the
wired remote controller
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
Menu selection Reset operation
4. Test run
Press the
5. Sensor info
button.
6. Service check
7. Simple settings
Press the
button.
(Restart)
8. Detailed settings
9. Auto address Automatic reset
5 - 22
2WAY SYSTEM
2WAY SYSTEM
Remote Controller Functions
Remote Controller Functions
20:30 (THU)
Page [ ] Confirm
Fig. 9
Unit status
When settings are
made from a remote
controller, the indoor
unit where that
remote controller is
connected stops.
Entire system stops.