Detailed Settings In Eeprom Of Outdoor Unit - Panasonic U-8ME1E81 Service Manual

14. Detailed Settings in EEPROM of Outdoor Unit

14. Detail setting in EEPROM of outdoor unit
Never use the DN code unlisted in the following table.
DN
04 Operation for using snowfall sensor
05 Outdoor fan silent mode
1
0C Indoor unit drain pump forced operation
Measures against smell when indoor unit cooling
0D
thermostat OFF
1A Demand 1 current (％)
1B Demand 2 current (％)
1E Demand remote controller display
23 E06 ignore function
2A Dew condensation prevention control of indoor unit
2B DP operation time for slime measures
3E PSccutgt delay-start setting
49 Automatic backup mode setting
81 Outdoor unit capacity
8F High static pressure setting
Item
1 - 44
Control Functions - Outdoor Unit
Setting No.
0=No sensor & control (P)
2=No sensor & no control
(For detail, refer to 5-2-2)
0=Invalid (P)
2=Silent priority & silent mode 2,,,,, 12=Silent mode 12
(For detail, refer to 5-2-3)
0=Invalid
1=stop for 2 hours and drive for 20 minutes constantly
2=stop for 20 minutes and drive for 20 minutes constantly
3=Drive constantly
4-6=delay drive when thermostat OFF
7=delay drive when thermostat OFF (P)
8-11=delay drive when stopped
12-15=Delay drive when thermostat OFF & stopped
(For detail, refer to 6-4)
0=Invalid (P)
1=Measures against smell
0=0%
45=45%,,,,,
130=130%
(For detail, refer to 10-1)
0=0%
45=45%
130=130%
(For detail, refer to 10-1)
0=No demand display
1=When demand ON, "ready to start" display (P)
2=When forced thermostat OFF with demand ON,
"ready to start" display
(For detail, refer to 10-1)
-1=Invalid (P)
1=1 ,,,,,
14 - 52=Never use
(For detail, refer to 13-1)
0=Invalid (P)
2=40 minutes
4=60 minutes
20=20 minutes
40=40 minutes
60=60 minutes
(For detail, refer to 6-4)
0=8 seconds delay-start (P)
1=(system address x1x8) second delay-start
2=(system address x2x8)
3=(system address x3x8)
0=Display (P)
(For detail, refer to 12-1-4)
0=Invalid 1=22
4=32 5=36
8=50 9=56
12=80 13=90
16=125 17=140
20=200 21=224
2 4 = 3 3 5 25=355
28=500 29=560
32=670 33=710
0=Invalid (P)
2=Never use
4=Never use
6=Never use
(For detail, refer to 5-2-1)
2WAY SYSTEM 3WAY SYSTEM
Control Functions
(P) : Factory preset mode
1=Sensor & control
3=Sensor & no control
1=Silent mode 1
40=40%
75=75% (P) ,,,,,
-1=No control
40=40%
50=50% (P) ,,,,,
-1=No control
0=0
13=13
1=30 minutes
3=50 minutes
30=30 minutes (P)
50=50 minutes
1=non-displayed
2=25 3=28
6=40 7=45
10=63 11=71
14=100 15=112
18=160 19=180
22=250 23=280
26=400 2 7 = 4 5 0
30=600 31=630
34=800 35=840
1=High static pressure mode
3=Never use
5=Never use