Machine the workpiece
4.11 Display G and auxiliary functions
Procedure
The G groups selection displayed in the "G Functions" window may differ.
References
For more information about configuring the displayed G groups, refer to the following
document:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
4.11.2
All G functions
All G groups and their group numbers are listed in the "G Functions" window.
Within a G group, only the G function currently active in the controller is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
● Current transformations
Display
TRANSMIT
TRACYL
TRAORI
112
1.
Select the "Machine" operating area.
2.
Press the <JOG>, <MDA> or <AUTO> key.
3.
Press the "G functions" softkey.
The "G Functions" window is opened.
4.
Press the "G functions" softkey again to hide the window again.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
Polar transformation active
Cylinder surface transformation active
Orientation transformation active
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal