Rotating The Graphical Representation - Siemens SINUMERIK 840D sl Operating Manual

Simulating machining
5.8 Modifying and adapting the simulation graphics
5.8.3

Rotating the graphical representation

In the 3D view you can rotate the position of the workpiece to view it from all sides.
Precondition
Simulation has been started and the 3D view is selected.
Procedure
...
...
138
1. Press the "Details" softkey.
2. Press the "Rotate view" softkey.
2. Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" and "Arrow counterclockwise" softkeys to change the
position of the workpiece.
- OR -
Keep the <Shift> key pressed and then turn the workpiece in the
desired direction using the appropriate cursor keys.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal