Siemens SINUMERIK 840D sl Operating Manual page 194

Tool management
9.8 Magazine
Magazine list icons
Icon/
Designation
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 200)
Changing a tool type (Page 201)
194
1. Select the "Parameter" operating area.
2. Press the "Magazine" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip
provides a short description.
The tool is preselected.
The magazine location is positioned at the change
position.
The magazine location is positioned at the loading
position.
The magazine location is disabled.
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Universal