Editing The Dictionary - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 Operator interface
2.4.12.3

Editing the dictionary

Learning function of the input editor
Precondition:
The control has been switched over to Chinese.
An unknown phonetic notation has been entered into the input editor.
52
3. Press the <Cursor down> key to reach the dictionary.
4. Keeping the <Cursor down> key pressed, displays all the entered pho-
netic notations and the associated selection characters.
5. Press the <BACKSPACE> softkey to delete entered phonetic notations.
6. To select the associated character, press the <cursor right> or <cursor
left> keys.
7. Press the <input> key to enter the character.
1. The editor provides a further line in which the combined characters and
phonetic notations are displayed.
The first part of the phonetic notation is displayed in the field for select-
ing the phonetic notation from the dictionary. Various characters are
listed for this particular phonetic notation.
2. Press the number key to insert the associated character into the addi-
tional line.
The next part of the phonetic notation is displayed in the field for select-
ing the phonetic notation from the dictionary.
3. Repeat step 2 until the complete phonetic notation has been compiled.
Press the <TAB> key to toggle between the compiled phonetic notation
field and the phonetic notation input.
Compiled characters are deleted using the <BACKSPACE> key.
4. Press the <input> key to transfer the compiled phonetic notation into the
dictionary and the input field.
Operating Manual, 01/2015, 6FC5398-6AP40-5BA2
Universal