Remove The Separator (Uw, Bc) - KitchenAid KUWS24RSBS Technical Education

REmOVE THE SEPARATOR (UW, BC)

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Locate the adhesive squares below the sep-
arator that cover the wires and connector.
Remove the adhesive squares carefully so
they can be reused during reassembly.
2. Disconnect the wire connector from the back
of the unit by pressing the locking tab and
pulling it out. (The Beverage Center will have
two connectors at the back of the unit.)
Adhesive
Squares
4-3
3. Remove the two screws, one at each side,
that secure the separator to the unit.
Right side
screw
To remove the separator, grasp the front
4.
edge with both hands and pull to release the
separator and remove it from the unit.
Grasp and
pull with
both hands
5. Remove the last two rack tracks that support
the separator.