REmOVE THE RELAY / OVERLOAD & RUN CAPACITORS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1.
Remove the unit compartment cover (see
page 4-15)
Use a small screwdriver to lift the wire retain-
2.
er off of the Run Capacitor
3.
Disconnect the wire connector from the Re-
lay / Overload.
4.
Pull the Run capacitor and the Relay / Over-
load off the terminals of the compressor.
5.
Pull the Run capacitor off the support rod of
the Relay / Overload.
4-18