Dell PowerEdge R940 Instruction page 5
Upgrading the dual processor to quad processor system
Hide thumbs
Also See for PowerEdge R940:
- Installation and service manual (161 pages) ,
- Technical manual (51 pages) ,
- Service (14 pages)
Advertisement
Figure 3. Installing PEM power board
6
Place the heat sinks, processors, and processor brackets for installation on the static-safe work table.
NOTE:
The heat sinks, processors, processor brackets, and memory DIMMs are not part of the kit. They have to be
ordered separately.
7
Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
NOTE:
Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
Upgrading the dual processor to quad processor system for the PowerEdge R940
5
Advertisement
