Pioneer Metro Installation & Owner's Operation Manual page 15

Parts guide for your Metro – Promet, baffl es and wetback options
Your Metro wood fi re must be regularly maintained and we recommended
it is also serviced annually. If a wood fi re is not regularly maintained and
serviced, the life span will be reduced.
If your Metro wood fi re has been neglected, by not being regularly
maintained and serviced, with authorised Metro parts replaced as required,
your warranty may be declined.
Listed below are the parts and product codes for your Metro wood fi re. The
promet/baffl e should be regularly checked and must always be in place
during the operation of your fi re.
The baffl e should be resting on four support lugs (two on each side of the
fi rebox). It must be hard back against the rear of the fi rebox with the 'promet
extension' (white board) or return front steel edge of the baffl e facing forward.
Model
• ECO Trend Insert
• LTD Trend Insert
• Smart Insert
• LTD Smart Insert
Type of promet required / Type of steel baffl e(s) required
ECO Small Promet
500-1650
LTD Small Promet
500-1700
Smart Front Promet Smart Rear Promet
500-1675 500-1800
Smart Front Promet Smart Rear Promet
500-1675 500-1800
Hairline cracks in the promet extension are not uncommon and will have
no adverse effect on the operation and performance of your Metro wood
fi re. These cracks are the result of intense heat coupled with expansion and
contraction and is normal wear and tear.
If the promet extension starts to break up and pieces fall into the fi rebox it
must be replaced.
Note: Impact damage when loading wood and burning wood which is not
properly seasoned, i.e. 25% moisture content or more, will cause the promet
to disintegrate and require replacement. Always burn dry well seasoned
wood and take care when loading wood into the fi rebox.
ECO Insert Front ECO/LTD Insert Rear
500-2250
TD Insert Front Baffl e ECO/LTD Insert Rear Baffl e
L
500-2850
Smart Front Baffl e Smart Rear Baffl e
500-2350
Smart Front Baffl e Smart Rear Baffl e
500-2350
Wetback options
No wetback if this fi re is
500-2300
installed in a clean air zone.
The 3kW or 4kW Wetback
can be fi tted in a non-clean
air zone.
3kW Wetback 450-0100 or
4kW Wetback 450-0150
3kW Wetback 450-0100 or
500-2300 4kW Wetback 450-0150
Smart Booster 450-0350
500-2400
Smart Booster 450-0350
500-2400
15