Epson S1V30080F00A300 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Motherboard
  5. S1V30080F00A300
  6. User manual
Epson S1V30080F00A300 User Manual

Epson S1V30080F00A300 User Manual

S1v30080 series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S1V30080 Series
Evaluation Board
User's Guide
Rev. 1.00

Advertisement

Table of Contents
loading

Related Manuals for Epson S1V30080F00A300

Summary of Contents for Epson S1V30080F00A300

  • Page 1 S1V30080 Series Evaluation Board User’s Guide Rev. 1.00...
  • Page 2 Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products.

  • Page 3: Table Of Contents

    4.4 PLD and external flash memory power supply selector jumper pin J6 ........ 28 4.5 Micro SD card precautions ....................... 28 5. Board Circuit Diagram ....................29 Revision History ......................35 S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 4: Introduction

    This allows debugging of the voice LSI control program using the built-in ROM of the S1V30080 or data in the Cinderella flash memory. With this function, the host interface mode written in the data may be "SPI (clock synchronized serial)," "I2C," "Standalone 1" or "Standalone 2." S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 5: Cinderella Board Series Configuration

    1.2 Cinderella board series configuration The Cinderella boards are configured as shown below. Table 1.1 Cinderella board series configuration Board model number S5U1V30080D00A1 S5U1V30080D00A3 S1V30080 model number S1V30080F00A300 S1V30080F00A300 Built-in ROM data Japanese voice Japanese voice data data Interface mode when initialized by...

  • Page 6: Before Starting

    Note Items 2), 3), 5), 6), 7), and 8) may differ from those shown in the photographs here. Figure 2.3 Note 1 Used for S1V30080 demo with the CASTLE, and not within the scope of this document. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 7: Cinderella (S1V30080 Voice Lsi Evaluation Board)

    VDD1 (+5 V) VDD2 (+3.3 V) VDD3 (+1.8 V) CLOCK_OUT NRESET SCKS_FLASH SCKM 3.3 V LVCMOS SIS_FLASH 3.3 V LVCMOS SOS_FLASH 3.3 V LVCMOS CON1 NSCSM_FLASH NSCSM 3.3 V LVCMOS MSGRDY STBYEXIT MUTE S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 8 SYSTEM_EN GPIO8 3.0-5.5 V CMOS Note Details of how to control the S1V30080 on the Cinderella board using CASTLE are not included in this document. Contact Seiko Epson for more information. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 9 * Do not provide power from this connector when VDD is fed from J1 or J3 on the Cinderella board. This will short-circuit the power supply, possibly resulting in damage. Voice output connector CON5 This should be connected using the speaker cable provided. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 10 SW7-2 Interface mode  Writing data to Cinderella board  Cinderella + CASTLE demo  Connecting to an external host CPU Cinderella standalone demo Standalone 1 Cinderella standalone demo Standalone 2 S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 11 * Avoid short-circuiting pin 1 to 2 with a 5 V power supply, as this will subject the CPLD and external flash memory to a voltage exceeding the specified ratings and result in damage. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 12 17) Standalone mode 7-segment LED Displays the file index number in "Standalone 1" or "Standalone 2." 18) LED indicator Illuminates when connected to the S1V30080 SOUND_PLAYING and play-back is in progress. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 13: Cinderella Block Diagram

    SYSTEM_EN SCKS S1V30080 MSG_RECEIVE SOUND_PLAYING CON2 7-segment 7セグメント SCLK SET_PLAY0 SET_PLAY1 CPLD SET_PLAY2 SET_PLAY3 MSG_RECEIVE SERIAL FLASH Memory SOUND_PLAYING SYSTEM_EN CON1 RESET Push SW DIP SW Figure 2.6 Cinderella block diagram S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 14: Castle Board

    The CASTLE can also be used to control the S1V30080 on the Cinderella board. Details of how to control the S1V30080 on the Cinderella board using the host CPU on the CASTLE are not included in this document. Contact Seiko Epson for more information. 2.3.1 CASTLE Part names and functions Figure 2.7 CASTLE board obverse side...
  • Page 15 VDD1 (+5 V) VDD2 (+3.3 V) VDD3 (+1.8 V) CLOCK_OUT NRESET SCKM SCKS_FLASH 3.3 V LVCMOS SIS_FLASH 3.3 V LVCMOS SOS_FLASH 3.3 V LVCMOS CON1 NSCSM NSCSM_FLASH 3.3 V LVCMOS MSGRDY STBYEXIT MUTE S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 16 S1C33E07 debugging ICD interface connector Used for voice LSI control S1C33E07 debugging. The S1C33E07 program is written in the flash/SRAM multi-chip memory. Do not use this connector. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 17 Check that JP1 is set to the default setting as shown in Table 2.9. Table 2.9 JP1 setting JP1 setting Remarks Short circuit Pin 1 to 3, Pin 2 to 4 Default S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 18 Cinderella board data writing complete Table 2.11 Error indication patterns LED6 LED5 LED4 LED3 LED2 LED1 Description Flashing SD card format error Flashing Data transfer error Flashing Memory capacity overload Communication error S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 19: Castle Block Diagram

    I/F CLOCK_OUT GPIO0 Buf. GPIO1 GPIO2 DIP SW GPIO3 GPIO4 GPIO5 S1C33E07 Push SW GPIO6 GPIO7 RESET GPIO8 GPIO9 +3.3V 14.7456MHz 32.768kHz Flash / SRAM Figure 2.9 CASTLE board block diagram S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 20: Cinderella And Castle Connection

    This section explains how to connect the CASTLE board to the Cinderella board. Insert CON1 and CON2 on the Cinderella board into CON1 and CON2 on the CASTLE board. (Connections are unidirectional.) Figure 2.10 shows the Cinderella and CASTLE boards connected. Figure 2.10 S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 21: Usage Instructions

    Data written can be accessed using Cinderella standalone demos or by connecting an external host CPU. Note The product warranty does not cover using the CASTLE to write ROM data to a board other than the Cinderella board. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 22: Data Writing Flowchart

    Press CASTLE reset switch (SW6) once to initialize CASTLE and Cinderella boards. Press CASTLE SW2 once to start writing to Cinderella flash memory. (Writing is complete when CASTLE LED1 to LED6 are all illuminated.) S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 23 Table 3.2 CASTLE SW1 settings for writing data to Cinderella board SW No. Function Description SW1-1 Off: Default SW1-2 Off: Default SW1-3 Off: Default SW1-4 Off: Default SW1-5 Off: Default SW1-6 Function selection On: External flash write mode S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 24: Cinderella Board Data Writing Micro Sd Card

    This file is generated by the "S1V30080 Series Sound Tool." For more details of the "S1V30080 Series Sound Tool," refer to the S1V30080 Series Sound Tool User Guide provided separately. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 25: Cinderella Board Standalone Demo

    Use Cinderella standalone demo control push-switches (SW2 to SW5) to select audio, start playback, and stop playback. For details of SW2 to SW5 control, refer to "3.2.1 Standalone mode 1 control" "3.2.2 Standalone mode 2 control." S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 26: Standalone Mode 1 Control

    Table 3.7. Push-switches SW2 to SW5 can be used for control when it is off. Table 3.7 DIP switch (SW6) functions for Standalone 1 SW6-1 SW6-2 SW6-3 SW6-4 Standalone 1 SET_PLAY[0] SET_PLAY[1] SET_PLAY[2] SET_PLAY[3] S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 27: Standalone Mode 2 Control

    SW3 and SW4 are pressed. For example, to specify file index number 21 (0x15), press SW4 once and SW3 five times. SW5 starts playback, and SW2 stops playback. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 28: Connecting To An External Host Cpu

    Connect the host CPU interface cable provided to CON3. Connect other pins to the host CPU board. * For details on cables, refer to Table 3.10. Turn on power to host CPU board. Control S1V30080 using external host CPU. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 29 3.0-5.5 V CMOS Gray * Power should be supplied from the host CPU board. The power supply voltage must be between 3.0 V and 5.5 V and must match other signal levels. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 30: Usage Precautions

    In particular, avoid connecting devices with power supplies, such as PCs. Voice output cable CON5 SOUND_OUT_P VOUT+ SOUND_OUT_N IN - VOUT- VOUT-N Voice output signal S1V30080 amplifier Evaluation board VOUT - VOUT + Figure 4.3 Device connection to voice output pin S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 31: External Power Supply Precautions

    If formatting is necessary due to problems writing to the micro SD card, it should be reformatted to FAT16 specifications. Use of cards other than the micro SD card provided is not covered by the warranty. S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)

  • Page 32: Board Circuit Diagram

    5. Board Circuit Diagram 5. Board Circuit Diagram The S1V30080 evaluation kit circuit diagrams are shown below. Cinderella circuit diagrams ·············· P30 to 32 CASTLE circuit diagrams ················ P33 to 34 S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 33 DGND CHS-04 CHS-04 CA_D.P CA_D.P NAR131S NAR131S NAR131S NAR131S DGND FLASH_EN_LS VOUT33 CHS-06 CHS-06 Reference Confidential TEST_EN SEIKO EPSON SEIKO EPSON SEIKO EPSON DGND Title Title Title Cinderella Cinderella Cinderella Size Size Size Document Number Document Number Document Number K-686...
  • Page 34 GPO2 SOUND_OUT_P SOUND_OUT_N SOUND_OUT_N SYSTEM_EN SOUND_PLAYING SYSTEM_EN SOUND_PLAYING SN74LVC8T245 SN74LVC8T245 HIF3FC-16PA-2.54DSA HIF3FC-16PA-2.54DSA DGND DGND DGND Reference Confidential SEIKO EPSON SEIKO EPSON SEIKO EPSON Title Title Title Cinderella Cinderella Cinderella Size Size Size Document Number Document Number Document Number K-686 K-686 K-686 1.00...
  • Page 35 DGND DGND VDD_80(Only for S1V30080) BLM18PG121SN1 BLM18PG121SN1 DGND VDD_OTHER BLM18PG121SN1 BLM18PG121SN1 DGND VDD_AMP BLM18PG121SN1 BLM18PG121SN1 Reference Confidential DGND SEIKO EPSON SEIKO EPSON SEIKO EPSON Title Title Title Cinderella Cinderella Cinderella Size Size Size Document Number Document Number Document Number K-686...
  • Page 36 G ND 3.3V PLVDD PLVSS #RESET RST# Reference S1C33E07 SST34HF3284 SKHLACA010 EPSON GNDPLL 0.1u R E S E T R E S E T R E S E T R E S E T G ND 0.022u EPSON G ND...
  • Page 37 BLM41PF800SN1 TP10 VOUT TEST PAD 100k Reference G ND G ND 1.8VPLL 0.1u G ND BLM41PF800SN1 G ND TP11 TEST PAD EPSON GNDPLL Confidential Title CASTLE Size Document Number R e v <Doc> D ate: Friday, July 18, 2008 Sheet...

  • Page 38: Revision History

    Revision History Revision History Revision details Date Rev. Page Category Details 3/3/2009 1.00 S1V30080 Series Evaluation Board User’s Guide EPSON (Rev. 1.00)
  • Page 39 20/F, Harbour Centre, 25 Harbour Road, Wanchai, Hong Kong Phone: +852-2585-4600 FAX: +852-2827-4346 Telex: 65542 EPSCO HX EPSON TAIWAN TECHNOLOGY & TRADING LTD. 14F, No. 7, Song Ren Road, Taipei 110, TAIWAN Phone: +886-2-8786-6688 FAX: +886-2-8786-6660 EPSON SINGAPORE PTE., LTD.

Table of Contents