Setting The Base; Settings - Siemens Gigaset 2000C Operating Instructions Manual


Main menu – functions

Switch to entering the short cut
contents.

Press the recall key.


Enter the code " 58".
Press the display key.

$  "  
Confirm

Starting a short cut
The start procedure is specific to the mobile unit status:

Starting from the "on" status

Press the menu key.
&
Scroll until

) "
and confirm – the first names (in

 alphabetical order) in the short cut list
are displayed .


Scroll to the desired name.
Press the display key.


 
Confirm – the active status is

indicated in the display until the short
cut has been completed.


Starting during connection set-up or during a call
Call up the short cut list with the display key. Continue
as described for the "on" status of the mobile unit.
Note:
The other short cut functions "Delete Entry", "Edit
Entry", "Display Entry", "Delete Memory" (deletes all
short cuts) and "Available Memory" are all executed in
the same way as described for the telephone direc-
tory, see page 38.
A shared memory with up to 100 entries is available
for telephone directory entries, short cut entries
and select services, see also "Deleting default select
services" page 53.
( )  
The short cut cannot be used with
cordless EM.
43
Main menu – functions

Setting the base

If your mobile unit is logged onto more than one base
(DECT systems*), you can set it to a par ticular base or
"best base" (automatic base changeover).

.
Setting the base


 


e.g.

 4

is selected

 
or
Note:
If you set
matically linked to the base with the best reception.
If you are located between two systems and the
mobile unit switches continuously, you should set it to
a par ticular system.
Activating priority selection
If you have set the mobile unit permanently to a base, you
can also activate
*  % 3
When
5
 
e.g.
for 30 seconds after switching it on or leaving the radio
range. If this base is not found, the mobile unit automatically
searches for another base.
* see also Note on page 18
Press the menu key.
%

Scroll to
and confirm.
If necessary, scroll to the required
base.
Press the display key.
*  % 3
or
Scroll to
) 4 % 
and confirm.
Return to the higher-level display.



, the mobile unit is always auto-
*  %
.
is activated - indicated by
– the mobile unit searches for the default base
44

Settings

Prerequisite:
You have selected a specific base as described above and
have called up the submenu
*  % 3
) 4 % 

 
6666666666666666

5
,


. The display shows:
To activate, press the display

key .
45