Activating/Deactivating Mobile Units; Activating/Deactivating The Keypad Lock; Telephone Functions; Internal Dialling - Siemens Gigaset 2000C Operating Instructions Manual

Putting the mobile unit into service

Activating/deactivating mobile units

Off status: display clear – calls are not received!

 
On status: e.g. is displayed – prerequisite for
all telephone functions, normal operating status!

Activating the mobile unit:
Press the On/Off key – you hear the
confirmation beep.
Display when telephone is in the "on"
status, see page 10.

Deactivating the mobile unit:
Press the On/Off key until the display
is clear – you hear the confirmation
beep .

Activating/deactivating the keypad lock

This allows you to protect your mobile unit against inad-
vertent key activation, e.g. when carrying it in your bag.
Calls are signalled even if the keypad is locked and can be
answered in the same way as when the telephone is on.
Prerequisite: Mobile unit is activated!

Activating the keypad lock:
Press the On/Off key for less than
1 second.
 
!  Display when keypad is locked.

Deactivating the keypad lock:
Press the On-Off key briefly.
Display when telephone is "on", see
page 10.
Note:
The mobile unit switches off completely if you press the
On/Off key for too long.
19

Telephone functions

This display when the mobile is



on is a prerequisite and initial status

 
for all telephone functions (see also


"Radio range" page 8).
 
, or an other name may be dis-
played (see page 48) depending on
the current base (system).

Note:
You can use the menu key or the display key
to call up the shor t cut list and star t your short cuts
when a connection is set up (while a call is in
progress).
All functions concluded with the on-hook key
can also be concluded by inserting the mobile unit
into the charging shell.

All functions can be cancelled with the on-hook
key .


Internal dialling

Press the talk key - the user's own
mobile phone number appears in the

display.
Enter the internal number when the
you hear the dial tone – the entered
digits are displayed .
See also Note!
Call Conduct the call – the name or the
number of the user is displayed .

Ending a call
Press the on-hook key or place the
mobile unit into the charging shelf.
Note:
The dialled number is automatically stored for number
redial, see page 23.
20
Telephone functions


External dialling

   
, , ,

External code

e.g.



Call

Ending a call
Note:
The dialled number is automatically stored for number
redial.

Answering calls

The mobile unit's ringing tone is audible. The caller's
name is displayed if the caller is an internal user. The
number or the name is displayed if the caller is an external
user (as for optiset telephones)!

The mobile unit is in the charging shell:
or

The mobile unit is not in the charging shell:

Ending a call
* Only if Auto Talk is activated – see also page 50!
Press the talk key - the user's own
mobile unit number appears in the dis-
play.
Enter the external code, e.g. "0",
when you hear the dial tone.
Dial the external number - the entered
digits are displayed.
See also Note!
Conduct the call.
Press the on-hook key or place the
mobile unit in the charging shell.
Simply remove the mobile unit from
the charging shell*.
Press the talk key.
Press the on-hook key or place the
mobile unit in the charging shell.
21