Changing The Mobile Unit Pin; Setting The Language; Resetting The Mobile Unit To The Default State - Siemens Gigaset 2000C Operating Instructions Manual

Settings

Changing the mobile unit PIN

You can use this function to change your personal mobile
unit PIN. The default PIN is "0000".
The mobile unit PIN is required for the following functions:
– changing the mobile unit PIN
– deleting the telephone directory

– resetting the mobile unit to the default state

Important:
If you forget your mobile unit PIN, a service engi-
neer will have to access the device. Forgetting a PIN
is just as serious as losing a key. In this case, please
consult your system administrator!
( *(
is displayed if an incorrect mobile
unit PIN is entered.
The functions can be cancelled/terminated with the
menu key before settings are saved/deleted.


Press the menu key.
  
Scroll to


 and confirm.

0   
Scroll to
1 

 and confirm.

&  *(
Scroll to
) (
and confirm.


PIN, e.g. Enter the "old" PIN and confirm.
The default PIN is "0000"!


New PIN, e.g. Enter the "new" PIN (max. 8 digits)
and confirm.


New PIN Enter the "new" PIN again carefully
' *(  9
and confirm –
displayed for approx. 2 seconds.

55
Settings

Setting the language

 Prerequisite: The mobile unit is on (German default
state*!)

Press the menu key.
Scroll to


 and confirm.

Scroll to
1 

 and confirm.

Scroll to
2"
 and confirm.

Scroll to desired language
e.g. and confirm.
 )

The following overview will help you to set the desired lan-
guage as described above when the unit is delivered or if the
language is changed inadvertently:
Displays for language settings
Deutsch Einstellungen
English Settings
Français Réglages
Italiano Impostazioni
Español Ajustes
Português Programações Program. local
Nederlands Instellingen
Note:
The language you set only applies to the mobile unit
display texts stored in the mobile unit.
is
* for international mobile unit variants: English – see table for display texts
  
0   
1  
Lokale Einst. Sprache
Handset Settings Language
Réglages combiné Langue
Impostaz.Telef. Lingua
Ajuste local Idioma
Língua
Lokale instell. Taal
56
Settings
Resetting the mobile unit to the default state
You can use this function to reset your mobile unit to the
defined default state, e.g. if you are handing over your
mobile unit to another user.
Note:
Resetting the mobile unit to the default state deletes
the redial numbers.
The mobile unit PIN and system registration
(logon) are, however, not deleted.

See the next page for settings in the default state!

Press the menu key.
  
Scroll to


 and confirm.

0   
Scroll to
1 

 and confirm.

( % : 
Scroll to
 7
and confirm.

PIN Enter the mobile unit PIN

and confirm.
57