Adjusting Stations Manually; Storing Stations Manually; Calling Up Preset Radio Stations; Automatic Station Search (Ams Function) - Silvercrest SKR 800 B2 Operating Instructions And Safety Instructions

Adjusting stations manually

♦ Press the
You must make your setting within 5 seconds otherwise you will have to
press the
Press the Preset + | SEARCH +
♦
to search for a frequency in steps of 0.1 MHz.
♦ Press the
and the station is saved.
The station frequency is shown on the display
switched off during the station search. If a station broadcasting in stereo is being
received,

Storing stations manually

Press the Preset + | SEARCH +
♦
for about 2 seconds to search for a frequency.
♦ Press the
flashes on the display
Press the Preset + | SEARCH + or the Preset − | SEARCH − button to
♦
search for a frequency.
♦ Press the

Calling up preset radio stations

Press the Preset + | SEARCH +
♦
to call up the saved radio station.

Automatic station search (AMS function)

The device uses the AMS function to automatically search for stations and
saves them in the 20 preset slots of the device. The device starts at the lowest
frequency. Depending on reception, it is possible that not all 20 presets can be
assigned.
♦ Press the
begins the station search and allocates the stations found to the preset slots
from
briefly on the display
the search is terminated and the station saved in the first preset is played.
SKR 800 B2
button for 2 seconds and the frequency display flashes.
button again for 2 seconds.
button for 2 seconds and the frequency display stops flashing
appears on the display.
| Mem/AMS button
, e.g.
| Mem/AMS button to save the station in the selected preset.
| Mem/AMS button
to max. . Every time a station is saved, the frequency remains
. Once all the station presets are filled, if receivable,
or the Preset − | SEARCH − button
and the speakers
or the Preset − | SEARCH − button
briefly. The current preset number
.
or the Preset − | SEARCH − button
for about 2 seconds. The device
GB │ MT
are
│ 81 ■