Manually Saving Stations; Select Saved Stations; Stereo Playback - Silvercrest SWE 200 A2 Operating Instructions And Safety Instructions

SilverCrest SWE 200 A2
Briefly press the "UP" (6) or "DOWN" button (14) to increase or decrease
the frequency by one step. These steps differ depending on the selected
frequency band and are for "FM">>0.1MHz, for "MW">>9KHz and for
"SW">>0.005MHz.

8.10 Manually saving stations

You have the option of saving 20 stations or frequencies per frequency
band. Proceed as follows:
 Search for a station which you want to save.
 Briefly press the "TIME/MEM" button (15).
 The last selected preset location (35) and "PRESET" (33) flash on the
display (7).
 Use the "M-" (2) or "M+" button (3) to select the preset location where
you want to save the desired station.
 Press the "TIME/MEM" button (15) to finish saving.
Please note that already occupied presets are overwritten.

8.11 Select saved stations

 To select a previously saved station, use the "M-" (2) or "M+" button (3)
to choose the preset location where the desired station is saved.
The set time is lost, but saved radio stations are preserved
when the batteries are changed.

8.12 Stereo playback

A station can be heard in stereo quality only in earphone mode. In this
case, the "STEREO" symbol (34) appears on the display (7).
54 - English