Saving Stations Manually; Access Saved Stations; Automatic Station Search (Ams Function) - Silvercrest SKRD 30 A1 Operating Instructions Manual

Saving stations manually

GB
IE

Access saved stations

Automatic station search (AMS function)

20
Prerequisite: The device is in the radio operational mode.
The device has 30 memory slots available for station frequencies. To save a station
frequency proceed as follows:
♦ Tune, as described previously, the desired station.
♦ Press the button Lock/Mem.
the lower, right corner of the display.
♦ Select with the buttons Preset+
for the tuned station between 1 and 30.
♦ Press the button Lock/Mem.
station is saved on the selected memory slot. The symbol MEM lights up
constantly.
Prerequisite: The device is in the radio operational mode.
♦ Select with the buttons Preset+
for the saved station between 1 and 30.
Prerequisite: The device is in the radio operational mode.
To allocate the memory slots to the station frequencies with the strongest receiv-
able stations a station search can be carried out.
NOTICE
► With the carrying out of the following described function all previously
saved stations will be lost.
♦ Press and hold down the button Bass/AMS/Mode
seconds. The device begins the station search and allocates to the memory
slots 1-30 the found stations.
NOTICE
► If more than 30 stations are found only the fi rst 30 reception frequencies
will be saved.
► If less than 30 stations are found the last memory slots remain unchanged.
Handling and operation
once. The symbol MEM begins to blink in
6
and Preset– the desired memory slot
11 10
again. The reception frequency of the tuned
6
and Preset– the desired memory slot
11 10
for at least two
7
SKRD 30 A1