Specification - ABB ScreenMaster RVG200 Manual

S C R E E N M A S T E R R V G 2 0 0 / PA P E R L E S S R E C O R D E R | C I/ R V G 2 0 0/0 0 1 - E N R E V. A
Symbols
Symbols that may appear on this product are shown below:
Functional earth (ground) terminal.
Both direct and alternating current supply.
This symbol, when noted on a product, indicates a
potential hazard which could cause serious personal
injury and / or death. The user should reference this
instruction manual for operation and / or safety
information.
This symbol, when noted on a product enclosure or
barrier, indicates that a risk of electrical shock and /
or electrocution exists and indicates that only
individuals qualified to work with hazardous voltages
should open the enclosure or remove the barrier.
The equipment is protected through double
insulation.
Recycle separately from general waste under the
WEEE directive.
Cyber security
This product is designed to be connected to and to
communicate information and data via a network interface. It is
your sole responsibility to provide and continuously ensure a
secure connection between the product and your network or
any other network (as the case may be). You shall establish and
maintain any appropriate measures (such as but not limited to
the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus
programs, etc.) to protect the product, the network, its system
and the interface against any kind of security breaches,
unauthorized access, interference, intrusion, leakage and/or
theft of data or information.
ABB Ltd and its affiliates are not liable for damages and/or
losses related to such security breaches, any unauthorized
access, interference, intrusion, leakage and/or theft of data or
information.

Specification

Electrical
Power supply ranges
100 to 240 V AC ±10 % (90 min. to 264 V max.)
50 / 60 Hz
24 V DC (23.0 to 24.5 V DC)
Power consumption
25 W max.
Isolation
500 V DC to earth (ground).
General safety
EN61010-1
cULus
Overvoltage Class III on mains,
Class II on inputs and outputs
Pollution category 2
Physical
Size – mm (in.)
Height and width:
Depth behind panel:
(including terminal cover)
Weight – kg (lb)
2.0 (4.4) approx. (unpacked)
EMC
Emissions & Immunity
Meets
requirements of: EN50081-2
EN50082-2
EN61326 for an industrial environment
Environmental
Operating temperature range
0 to 50 ºC (32 to 122 °F)
Storage temperature range
–10 to 60 ºC (14 to 140 °F)
Humidity range
5 to 95 % RH (non-condensing)
Front panel sealing
IP66 and NEMA4X
Rear panel sealing
IP40 (with rear cover)
IP20 (without rear cover)
Vibration
Conforms to EM60068-2
144 x 144 (5.7 x 5.7)
147 (5.8)
3