Specification - ABB ScreenMaster RVG200 Commissioning Instructions

Symbols
Symbols that appear on this product are shown below:
Functional earth (ground) terminal.
Both direct and alternating current supply.
This symbol, when noted on a product, indicates a potential hazard which could cause serious personal injury and / or
death. The user should reference this instruction manual for operation and / or safety information.
This symbol, when noted on a product enclosure or barrier, indicates that a risk of electrical shock and / or electrocution
exists and indicates that only individuals qualified to work with hazardous voltages should open the enclosure or remove
the barrier.
The equipment is protected through double insulation.
Recycle separately from general waste under the WEEE directive
Restriction of Hazardous Substances (RoHS)
The European Union RoHS Directive and subsequent regulations introduced in member states and other countries limits
the use of six hazardous substances used in the manufacturing of electrical and electronic equipment. Currently,
monitoring and control instruments do not fall within the scope of the RoHS Directive, however ABB has taken the
decision to adopt the recommendations in the Directive as the target for all future product design and component
purchasing.

Specification

Electrical
Power supply ranges
100 to 240 V AC ±10 % (90 min. to 264 V max.)
50 / 60 Hz
24 V DC (23.0 to 24.5 V DC)
Power consumption
43 VA max.
Isolation
500 V DC to earth (ground).
General safety
EN61010-1
cULus
Overvoltage Class III on mains,
Class II on inputs and outputs
Pollution category 2
Physical
Size – mm (in.)
Height and width:
Depth behind panel (including
terminal cover):
Weight – kg (lb)
2.0 (4.4) approx. (unpacked)
CI/RVG200–EN
144 x 144 (5.7 x 5.7)
147 (5.8)
EMC
Emissions & Immunity
Meets EN50081-2
requirements of:
EN50082-2
EN61326 for an industrial environment
Environmental
Operating temperature range
0 to 50 ºC (32 to 122 ºF)
Storage temperature range
–10 to 60 ºC (14 to 140 ºF)
Humidity range
5 to 95 % RH (non-condensing)
Front panel sealing
IP66 and NEMA4X
Rear panel sealing
IP40 (with rear cover)
IP20 (without rear cover)
Vibration
Conforms to EM60068-2
3