7.3
Key Pad
The CP410 has 16 keys, that can be categorized into Numerical Keys,
Navigation Keys and Functional Keys.
The Functional or Auxiliary Keys F1- F10 can be defined in CP400Soft. They
can, for example, be used to set a controller bit or register, to change a screen or
to display a password table. Please see the CP400Soft User's Manual for details.
When a key is pressed, the operator terminal will make a "beep" sound to signal
that a command is pressed. The default setting, a 200 ms beep, can be config-
ured in CP400Soft.
ABB, 1SBC159101M0201
CP410
Functional keys F1-F10
Numerical keys
Navigation keys
Operation
17